HOW TO USE

The Immunity social safety Electrostatic sprayer from MedCare PPE.

1.Open the packing box, take out the spraying unit and place it horizontally and attach the body straps securely

2.Next connect the charger and connect it to the charging port on the side of device then plug into the mains wall socket to fully charge, when fully charged remove plug from charging port on side of the device.

3.Then Unscrew the lid of the tank and pour the required amount of microSure surface protectant into the tank, not exceeding 10 Litres,

4.Now you are ready to electrostatically microsure any space, place the device on securely using the body straps,

5.For smaller compact spaces between 1 to 2 metres you only need to turn on the power switch on the side of the device which will give a much slower dispense of spray, And for bigger spaces between 3 to 6 metres turn on the fan located on the handle of the sprayer gun, pointing the sprayer and moving from left to right and up and down is all you need to do because using the Immunity social safety Electrostatic sprayer technology on Objects and surfaces electrostatically attracts the disinfectant so you can be sure that every square inch will be covered, Even the areas you can't see or reach,

6.When you have finished using the Immunity social safety Electrostatic sprayer it is important to clean the filters to prevent potential filter clogging, to do this you should drain any remaining microSure from the tank and pour half a litre of water into the tank and run the sprayer for 1 minute to clean the filters, Then Remove any remaining water from the tank and place it in a safe dry storage area.